Surge Protection Devices, Hard Wire & Modular

These RCHW Models have either a 50kA or 100kA per phase Surge Rating for Residential, Commercial, and Industrial applications. All RCHW Surge Protectors are ETL Listed for use as either a Type 1 or Type 2 UL 1449 3rd edition SPD devices.

The MST Modular Surge Protectors are designed for single or three phase electric services in Commercial and Industrial applications. These devices have either a 50kA or 100kA per phase Surge Rating and are Listed to UL 1449 3rd Edition.

The TST Series is a Din Rail Surge Protector designed to protect sensitive electronic equipment. Protection for PLCs, SCADA Systems, POS Systems, Alarm Systems, CNC Machinery and other microelectronic based equipment. Listed to UL 1449 3rd Edition.

The SST Series Signal Line Surge Protection Device is designed for discrete signalling 4-20mA protocols. Units provide protection up to 10kA against any Transient Voltage that exceeds the nominal signalling voltage.

The HLP Series is designed to protect Highway Lighting, Traffic Lights, Electronic Ballasts, Security and Fire Alarm Systems. The product is weatherproof. LED Diagnostics. Available in 120, 240 or 480 Volts. Listed to UL 1449 3rd Ed.

The BPT Series is a Transient Surge Protector that is designed for parallel installation at a branch panel in a commercial or industrial environment. The BPT is ETL Listed to UL 1449 3rd Edition.

The MAP Series hardwire Surge Protector contains short circuit and thermal fusing, a smart sensing technology that distinguishes between surges and overcurrent events. Surge Rating 50kA per phase. LISTED TO UL 1449 3rd EDITION

The MPT Series is a modular Transient Protection System providing high energy surge protection for Commercial and Industrial applications. Available with 100kA, 200kA or 300kA Surge Ratings per phase.

SLT-HEB Series of protectors is available as either a 4 or 5 wire unit that will interface directly, in series, with 4 or 5 pin Euro DC Micro Connectors. Surge Protection for Ski Lifts, Gondolas, Escalators, Elevators, Rides and Conveyors.

The SLT/HEB Series of Surge Protectors are available as either 8 or 10 Wire SPD (surge protective device) unit that will interface directly, in series, with dual 4 or 5 pin M12/Euro/DC Micro Connectors. Ski lift Surge Protection.

M-Ti's Signal Line Surge Protection Device. 24 Volt (AC or DC) 4 Wire Signal/Power 5 Amp Max. High Energy Surge Capability with Silicone Avalanche Diode, SAD, Technology. (002-4001-000) SRP was $59.00